-
July 7th, 2000, 04:07 PM
#1
Inactive Member
You have to run your own wires.
A switching power source would be one that comes on when the lights are on. Use a volt meter to find a source, then run a wire. You may also want to put a fuse near the power source on that 12v signal too, but that part is optional. I'm not sure where, or which wire off of the top of my head would be a good 12v power source.
-
July 8th, 2000, 03:09 AM
#2
Inactive Member
Does anyone know where the Parking lights wires are so I can hook up my new Piaas?
I have a 94 GSR. The instructions say to connect to a swiching power source like the parking lights.
Thanks
Tyler
-
July 9th, 2000, 05:24 AM
#3
Inactive Member
Look along the top of the fuse panel, there are a few quick-plug type connections. One of these should be tapped into the parking light circuit. Test with a multimeter to verify before connecting to any circuit. Be sure to fuse your additional devices at the power source. Good luck. Tom
------------------
'92 Civic Si H/B (D16Z6) with JRSC tryin' to get rid of knock, I/H/E...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks